Thermal spraying Job Shop
Impact resistance
Some thermal sprayed examples
Sliding parts around buckets for hydraulic excavator
| Type of thermal spraying | High Velocity Oxy-Fuel spraying (HVOF) |
| Sprayed material | WC-Cr3C2-Ni |
| Purpose of thermal spraying | Improvements of abrasion resistance, corrosion resistance, impact resistance |
| Substrate | Iron based casted products |
| Remarks | No post processing required |
Crushing blades for tunnel boring machines, Disk cutters
| Type of thermal spraying | High Velocity Oxy-Fuel spraying (HVOF) |
| Sprayed material | WC-Cr3C2-Ni |
| Purpose of thermal spraying | Abrasion resistance, corrosion resistance properties |
| Substrate | S45C+carbide tip+hard surface build up |
Drill bits of boaring machines
| Type of thermal spraying | HVOF |
| Sprayed material | WC-Co |
| Purpose of thermal spraying | Impact resistance, abrasion resistance |
| Substrate | Ferrous |